Multi-Pairs with overall shield and PVC/PVC insulation
20 AWG solid conductors for high system accuracy
Twisted pairs for reduced electromagnetic interference
Communication wire for start-up and maintenance servicing
Rugged 221°F (105°C) FR PVC insulation for excellent mechanical strength
Overall aluminum/Mylar® shield with drain wire to minimize electrostatic noise
A nylon® ripcord is included for easy jacket stripping
Single conductors are carefully selected and matched to meet or exceed ANSI MC96.1-1982 tolerances. Each conductor is insulated with 15 mils nominal, 221°F (105°C) high dielectric FR PVC compound to insure insulation integrity. Matched pairs are twisted to reduce the amount of electromagnetic interference.
The twisted pairs are cabled and a polyester backed aluminum shield with a tinned copper drain is helically applied to further reduce electrostatic noise. The shield overlaps approximately 25% to assure continual coverage during flexing.
This style includes an insulated communication wire to transmit telephone or other signals during installation or service.
A rugged 221°F (105°C) jacket of FR PVC compound is applied over the pairs for excellent mechanical strength.
When multi-pair constructions are purchased, the individual pairs are numbered for easy hook up. The entire construction is color coded according to ANSI MC96.1-1982 to aid in quick identification of both polarity and calibration.
