Input: RTD, T/C, mV, and Resistance sensors Output: 4...20 mA, opto relay and LCD bar graph with zoom feature Isolation voltage 2 kVac/dc 2-way configuration (Windows) Accuracy < 0.1°C (Pt100) Configurable linearization, damping and status indication PC signal monitoring EEx ia IIC T5, ATEX II 1G

FlexTemp Iso is a 4...20 mA (20...4 mA) loop-powered universal transmitter with galvanic isolation between input, output and relay.   FlexTemp Iso has a millivolt input for T/C sensors and a resistance input for RTD sensors.   Thus it can be used also for linear resistance, current and voltage measurements.   2, 3 or 4-wire connection can be selected for the resistance input.   Local, remote or fixed CJC-compensation can be configured.   Using a PC, the Windows based Flex-program and a FlexProgrammer, the following parameters can be configured via the 2-way communication on the signal cable: TAG-no., input type, number of wires, CJC-compensation, measuring range, damping, 30-point linearization table, error indications and relay output.   FlexTemp Iso can be used for cable resistance measurement.   FlexTemp Iso with relay output is ideal as local temperature controller with display and alarm capability.   Furthermore, the output signal can be sent to a PLC for remote monitoring. Additional information: Data Sheet.