LC-display with zoom on range Configurable engineering unit, decimal point position, damping, measuring range, number of digits and linearization table Powered from 4...20 mA input Voltage drop 2 Volt 80mm O.D. stainless steel housing Configurable error limits and indication EEx ia IIC T4/T5, ATEX II 1G Ex N IIC T5 Stainless steel housing for panel, wall or pipe mount

The configurable display is used for the read-out of a 4...20 mA signal.   FlexView shows the measuring data on a full 4-digit LC display, having a high readability even in faint light.   A user specified linearization table for e.g. tank level measuring can be saved in FlexView.   The table is used to compensate for a possible non-linearity between measuring data and the actual data, for example at volumetric measuring in an asymmetric tank.   The enclosure in polycarbonate plastic ensures high resistance to moisture even under hard environmental conditions.   A large number of displays for indication of pressure, temperature, weight and flow can be replaced by FlexView.   The flexible concept ensures that FlexView can be used also for future applications.   The most commonly used engineering units are preloaded and easily accessed.   Besides that, a unit according to user wishes can be designed.   A user specified linearization table for e.g. tank level measuring can be saved in FlexView.   The table is used to compensate for a possible non-linearity between measuring data and the actual data, for example at volumetric measuring in an asymmetric tank.   A large number of displays for indication of pressure, temperature, weight and flow can be replaced by FlexView.   The flexible concept ensures that FlexView can be used also for future applications.   Additional information: Data Sheet.