|
|
  
|
|
Instrumentation, Hand Held Thermometer, RTD
|
|
|
|
|  |
Accurate to ±0.1% of reading or ±0.7°F (±0.4°C), whichever is greater. |
|
Field calibration capabilities minimize probe error |
|
Stores up to 99 readings |
|
Features selectable temperature scale or resolution |
|
Our hand-held thermometer performs like an expensive bench-top unit.
Microprocessor-based meter features keypad selectable measuring scale (°F or °C) and resolution (0.1° to 1°).
Choose an alpha of 0.003850a (DIN IEC 751) or 0.003916a.
Dual LCD gives you two measurements at once: the four-digit upper display shows current reading while the five character alphanumeric lower display facilitates setup, calibration, or special functions.
Nonvolatile memory stores factory and field calibration constants; currently selected resolution, scale and setup values; and up to 99 user-selected readings.
Many easy-to-use functions help you with your measuring applications: ALPHA displays your currently selected alpha (3850 or 3916); CAL lets you calibrate the probe manually or automatically to 32°F or 212°F (0°C to 100° C) HOLD "freezes" current reading in lower display; PEAK and VALLEY display single high and low points respectively.
USE (delta)T to display the differential between present temperature and temperature at the time the key was pressed - dual display shows both readings.
STORE allows you to send up to 99 readings to memory.
RECALL displays average of stored readings; use the INC and DEC keys to sequentially display stored readings.
Rugged ABS plastic housing protects meter against harmful chemicals and hard use.
Features a built-in stand and a sealed keypad with a shatter-proof display window.
Powered by one 9V battery (included).
Meter accepts any 100 OHM platinum RTD probe with the three-pin connector; order probes separately.
NOTE: NIST traceability is available when you order the RTD thermometer with our 100 OHM platinum RTD probe.
Inquire when placing your order.
|
|
Description |
Part Number |
|
Thermometer, RTD |
|
|
|
